Stretch Limit=100%, Stretch Limit=10%
Restricts the amount of the surface to be stretched. When the object is stretched by the amount under the specified number, the usual calculations using the spring coefficient are applied. When it is stretched by more than the specified number, the width is increased to keep the stretching below the number entered. It is effective when you want to give variation on the quality of the surface.
Compress Stress=1, Compress Stress=0
The compress power (stress) of surface is controlled. Compress Stress=1 is the default setting. A quality of a fabric is controlled by the compress stress. It makes a soft fabric like cotton with the surface of Spring=big, Compress Stress=low.
Parallel Resistance=100%, Parallel Resistance=0%
The air resistance parallel to the surface is controlled. The air resistance in parallel has a default value of Parallel Resistance=100%. The variation of the air resistance with the direction of the fabric is reproduced by the parallel resistance. It is useful for making falling leaves or a more realistic wind-blown flag.
Shrink
It reduces the specified surface to the size entered. The surface is reduced to 90% when 90% is specified. It is effective when you want to reduce the looseness of a dress or to create frills.